10 – Single Socket Tee

Designed to give a 90° butt joint between two tubes.

Key Clamp frequently used for the joint between end uprights and the middle rail where the railing site is straight and level. Also used for base ties on racking. This fitting cannot be used where through tube is required to be joined within the fitting. Type 25 should be used when a join in the tube is necessary.

Multiple Sizes -This part is capable of joining tubes of different dimensions. See technical data on tubes A and B below.

£5.83£21.70

£9.69
£5.83
£7.04
£10.51
£14.70
£9.88
£11.98
£14.35
£11.31
£13.62
£21.70
£20.91

Designed to give a 90° butt joint between two tubes.

Kee Klamp frequently used for the joint between end uprights and the middle rail where the railing site is straight and level. This Kee Klamp fitting is also used for base ties on racking. This fitting cannot be used where through tube is required to be joined within the fitting. Type 25 should be used when a join in the tube is necessary.

Multiple Sizes -This part is capable of joining tubes of different dimensions. See technical data on tubes A and B below.

Brand

Fitting Function

,

Set Screw

Case hardened steel, Kee Koat corrosion resistant coating

Manufacturer

Standards

,