62-8 – Standard Railing Flange, to suit 48.3mm O/D tube

Ideal when a structural fixing is required. When fixing guard railing and balustrades, Type 62 should always be used. The holes are of sufficient diameter to insure proper fixing with either a mechanical or chemical anchor. The two set screws in the vertical socket give greater side load stability to the upright. It is recommended that the fixing holes in the flange should be in line with the applied load. Used for DDA compliant railing.

£20.68

Ideal when a structural fixing is required. When fixing guard railing and balustrades, Type 62 should always be used. The holes are of sufficient diameter to insure proper fixing with either a mechanical or chemical anchor. The two set screws in the vertical socket give greater side load stability to the upright. It is recommended that the fixing holes in the flange should be in line with the applied load. Used for DDA compliant railing.

Weight 1.26 kg
Brand

Set Screw

Case hardened steel, Kee Koat corrosion resistant coating

Manufacturer

Standards

,