Categories

More information

Tel: 0208 874 6566

Mezzanine Pallet Gates

The range of KEE GATE pallet gates provides a safe working area for employees on mezzanine floors or raised working areas.    The gates are constructed using Kee Klamp® or Kee Lite® fittings and tubes, and can be linked seamlessly into an existing guardrail or barrier to provide complete protection while goods are being transported up or down from the mezzanine.

The range includes four different models to suit varying types of operational requirements and is lightweight and counter-balanced for ease of operation.

Standard pallet gate

 

Pallet Gate Type A - Standard Model

The standard model pallet gate is balanced for a positive open and close action.  A toe-board is included on the mezzanine edge side to
protect workers below.

The standard model pallet gate can take pallets up to 1.4m x 1.48m with a maximum height capacity of 1.6m.

 

Narrow pallet gates for limited space

 

Pallet Gate Type B - Narrow Frame Model

The narrow frame pallet gate is ideal for mezzanines where space is limited. The design of this gate means that less floorspace is required to load and unload.  Balances for a positive open and close action, the pallet gates includes a toe-board mounted on the mezzanine edge site for enhanced safety.

The narrow frame pallet gate can accommodate loads up to 1.4m x 1.48m with a maximum height capacity of 1.8m.

 

 

 

Tall pallet gates for high loads

 

 

Pallet Gate Type C - Tall Model

The tall pallet gate offers the tallest capacity of the Kee Pallet Gate range. The cantilever design of the
gate provides maximum height with minimal ceiling height requirement. The tall pallet gate is balanced for a positive
open and close action.

The tall pallet gate accepts pallets up to 1.4m x 1.48m with a maximum height capacity of 2.2m.

 

 

 

Extra wide pallet gate for mezzaninesPallet Gate Type D - Extra Wide Model

The extra wide pallet gate provides the widest load capacity of the Kee Pallet Gate range. The gate design allows
maximum load width, whilst also offering 2m head clearance for workers.  The extra wide model is made from
Aluminium and balanced for a positive open and close action.  A toe-board is mounted on all sides to protect the gate from pallet contact.

The extra wide pallet gate can take pallets up to 1.4m x 1.95m with a maximum height capacity of 1.6m.

 

 

 

 

Assured Quality

The pallet gate range has been cycle tested for 50,000 openings to ensure their durability and salt spray tested for corrosion resistance to 672 hours.  This allows ensure continuous operation, even in corrosive environments. 

 

Features and benefits

  • EN 14122-3 compliant
  • Available in galvanised steel and aluminium
  • No welded parts so individual fittings can be easily replace if damaged
  • Constructed using Kee Klamp® and Kee Lite® fittings
  • Components are TUV approved for quality assurance
  • Extensive testing for guaranteed durability
  • Supplied part assembled for ease of on site installation

Ease of Use

Each gate is counter-balanced for ease of use and to ensure a positive open and close. 

Click here to watch our Kee Pallet Gate demonstration video.


There are no products matching the selection.