Categories

More information

Tel: 0208 874 6566

Kee Klamp Galvanised Fittings

KEE KLAMP fittings offer a flexible, versatile solution for the construction of structures such as handrails, safety barriers and guardrails. The principle is simple yet highly effective, proven over the last 80 years in thousands of completed projects across the globe. The KEE KLAMP system securely joins standard sizes of structural steel tube (from 17.5mm O/D to 60.3mm O/D) into almost any configuration imaginable, utilising the widest range of fittings available on the market today.

KEE KLAMP fittings are iron castings manufactured to the requirements of BS EN 1562 & BS EN 1563. Each fitting can support an axial load of 900 Kg and includes safety factor 2:1. The main fittings are TÜV certified for strength, manufacturing quality and consistency.  KEE KLAMP fittings offer a more flexible solution when it comes to constructing barriers, handrails and guardrails.  All components are designed with ease of installation in mind and to completely eliminate the need to weld or fabricate.

Features of KEE KLAMP fittings

  • Galvanised cast iron to BS EN ISO 1461
  • Fitted with KEE KOAT corrosion protected grub screws and THREDKOAT recess protection
  • TÜV certified for strength, manufacturing quality and consistency
  • Meets specified loadings up to 1500 N/m

The benefits of using KEE KLAMP fittings

  • No welding, so no hot work permits are required
  • No threading or bolting so no special tools are required
  • A flexible system that can accommodate on site variations
  • Cost effective to install; no specialist labour required

Project Service

Kee Systems can help you with all aspects of a project, including Free Technical Assistance, Site Surveys and Installation

For further information, please call us on Tel: 0208 874 6566 or fill out our online Contact Form and we'll be in touch to discuss your requirements. 


Items 1 to 10 of 105 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  1. 10 [tech]

    10 - Single Socket Tee

    Designed to give a 90° butt joint between two tubes.

    Frequently used for the joint between end uprights and the middle rail where the railing site is straight and level. Also used for base ties on racking. This fitting cannot be used where through tube is required to be joined within the fitting. Type 25 should be used when a join in the tube is necessary.

    Multiple Sizes -This part is capable of joining tubes of different dimensions. See technical data on tubes A and B below.

    Learn More

    Starting at: Excl. VAT: £3.93 Incl. VAT: £4.72

  2. A10[tech]

    A10 -Split Single Socket Tees

    Designed to allow additions or extensions to existing structures without the need for dismantling.

    Tube must not be joined within the fitting. Fitting has strength and function comparable to Type 10 fittings.

    Learn More

    Starting at: Excl. VAT: £14.08 Incl. VAT: £16.90

  3. 12 [tech]

    12 - 45° Single Socket Tee

    Engineered to create 45° angles.

    Most frequently used for bracing and struts.

    Learn More

    Starting at: Excl. VAT: £7.08 Incl. VAT: £8.50

  4. A12 [tech]

    A12 - Split 45° Single Socket Tee

    The unique "Hinge and Pin" system of this fitting enables existing structures to be easily extended without the need for dismantling.

    This fitting is most frequently used for bracing and struts.

    Learn More

    Starting at: Excl. VAT: £17.08 Incl. VAT: £20.50

  5. 14 [tech]

    14 - Straight Coupling

    Designed to form an in-line joint between two pieces of tube of the same size.

    If a constant diameter is required along the outside of the tube (such as for DDA handrail or garment storage), an internal spigot (type 18) should be considered.

    Learn More

    Starting at: Excl. VAT: £5.30 Incl. VAT: £6.36

  6. 15 [tech]

    15 - 90° Elbow

    A 90° elbow joint, most frequently used as an end joint for the top rail of safety railing on a level site. Learn More

    Starting at: Excl. VAT: £5.45 Incl. VAT: £6.54

  7. 16 [tech]

    16 - Clamp-on Tee

    Widely used for adding to and modifying existing structures. This performs the same function as a Type 10, but because of its open socket, it can be added to a complete structure. For an alternative fitting, see type A10. Type 25 should be used when a join in the tube is necessary. Learn More

    Starting at: Excl. VAT: £11.47 Incl. VAT: £13.76

  8. 17 [tech]

    17 - Clamp-on Crossover

    Designed to provide a 90° cross-over joint. Can be added to an existing structure. tube should not be joined within this fitting. For an alternative fitting, see Type 45 or Type A45. Learn More

    Starting at: Excl. VAT: £4.74 Incl. VAT: £5.69

  9. 18 [tech]

    18 - Internal Coupling

    An internal spigot providing a flush joint between two tubes of the same diameter. Not as strong as Type 14 and must not be used where a direct tensile load is applied. This fitting can only be used with 3.2mm thick tube. Note: Type 18 fitting must not be used as a load bearing joint. Learn More

    Starting at: Excl. VAT: £5.72 Incl. VAT: £6.86

  10. 19 [tech]

    19 - Adjustable Side Outlet Tee

    Type 19 fittings are normally used in pairs to form variable angle joints between 90° and 180°. The pairs are sold and priced separately. The Type 19-8T can produce an angle range between 60° and 180°. Learn More

    Starting at: Excl. VAT: £6.46 Incl. VAT: £7.75

Items 1 to 10 of 105 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction