Categories

More information

Tel: 0208 874 6566

Aluminium Fittings

KEE LITE fittings are made from a high grade Aluminium Silicon Magnesium Alloy making them ideal for use in harsh environments.  KEE LITE fittings are designed to suit BS EN755 tube in size 25, 32, 40 and 50 N.B. The components are extremely durable and strong yet light , weighing only one-third the weight of iron fittings, with about 75% of the comparable tensile strength. 

KEE LITE fittings offer flexibility and can be used in a variety of applications from contemporary shop and restaurant fittings to industrial guardrails and warehouse pallet gates.

Aluminium safety railings are ideally suited to harsh environments where corrosion resistance is important. KEE LITE fittings and aluminium tube provide a strong alternative to fabrication of tubular structures. Due to the superior corrosion resistance, aluminium KEE LITE railings offer extremely low maintenance solutions, particularly in outdoor settings such as coastal or exposed locations.

The simple but effective system of tube and modular fittings makes assembly quick and easy. A standard hex key is the only tool required to tighten recessed set screws, locking the tube firmly in place to create a strong aluminium railing.

Features of KEE LITE fittings

  • Lightweight
  • Corrosion Resistant
  • Require little long term maintenance
  • Fitted with Stainless Steel recessed grub screws
  • Main fittings are TÜV approved

The benefits of using KEE LITE fittings

  • No welding, so no hot work permits are required
  • Aluminium fittings are ideal for harsh environments
  • No threading or bolting so no special tools required
  • A flexible system that can accommodate on site variations
  • Cost effective to install; no specialist labour required

Project Service

Kee Systems can help you with all aspects of a project, including Free Technical Assistance, Site Surveys and Installation

For further information, please call us on Tel: 0208 874 6566 or fill out our online Contact Form and we'll be in touch to discuss your requirements. 


Items 1 to 10 of 36 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction
  1. L10 [tech]

    L10 - Single Socket Tee

    Designed to give a 90 degree butt joint between two tubes. Frequently used for the joint between end uprights and middle rail where the railing site is straight and level. Also used for base ties on racking. This fitting cannot be used where the tube passing through the sleeve is required to be jointed within the fitting. Learn More

    Starting at: Excl. VAT: £7.38 Incl. VAT: £8.86

  2. L14 [tech]

    L14 - Straight Coupling

    Designed to give an in-line joint between tubes of the same size. Frequently used to enable full tube lenghts to be used in railing applications. Learn More

    Starting at: Excl. VAT: £8.30 Incl. VAT: £9.96

  3. L15 [tech]

    L15 - 90° Elbow

    A 90° elbow joint, most frequently used as an end joint for the top rail of safety railing on a level site. Learn More

    Starting at: Excl. VAT: £9.00 Incl. VAT: £10.80

  4. L19 [tech]

    L19 - Adjustable Side Outlet Tee

    Used to form variable angle joints between 60 and 200 degrees. Not designed to absorb bending loads at barrier intersection. Note: Type L19 fittings are bagged in pairs and are weighed, priced and sold as such. Learn More

    Starting at: Excl. VAT: £21.96 Incl. VAT: £26.35

  5. L20 [tech]

    L20 - Side Outlet Elbow

    A 90° corner joint most frequently used for the top rail of safety railing. It can also be considered for the corner joint of benches, work tables, and other rectangular structures. Learn More

    Starting at: Excl. VAT: £12.61 Incl. VAT: £15.13

  6. L21 [tech]

    L21 - Side Outlet Tee

    Most frequently paired with Type 20 to give a 90° corner joint for the middle rail of safety railing and other rectangular structures. The upright passes through the fitting. Learn More

    Starting at: Excl. VAT: £9.40 Incl. VAT: £11.28

  7. L25 [tech]

    L25 - Three Socket Tee

    Most commonly used as the 90° joint between the top rail and an intermediate upright on safety railing. As there are two socket set screws in the sleeve, this fitting can be used where a join is required in the horizontal tube. The Type 10 fitting can be used as an alternative when a join in the tube is not required. Learn More

    Starting at: Excl. VAT: £11.32 Incl. VAT: £13.58

  8. L26 [tech]

    L26 - Two Socket Cross

    Usually paired with Type 25 to give a 90° joint between the middle rail and an intermediate upright on safety railing. The upright passes through the fitting. Learn More

    Starting at: Excl. VAT: £11.04 Incl. VAT: £13.25

  9. L29 [tech]

    L29 - 30° to 60° Single Socket Tee

    This adjustable fitting is most frequently used for struts and braces. It can be used at any selected angle between 30 and 60 degrees. Suitable for connecting an angled staircase rail to a vertical upright. Learn More

    Starting at: Excl. VAT: £15.65 Incl. VAT: £18.78

  10. L30 [tech]

    L30 - 30° to 45° Adjustable Cross

    This adjustable fitting can be used for railing on staircases between the mid-rail and intermediate upright which is required to remain vertical. It can be used at any selected angle between 30 and 45 degrees. Learn More

    Starting at: Excl. VAT: £36.37 Incl. VAT: £43.64

Items 1 to 10 of 36 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction